SmokingJoe Posted September 29, 2011 Report Share Posted September 29, 2011 ....................................... Link to comment Share on other sites More sharing options...
zap_man99 Posted September 29, 2011 Report Share Posted September 29, 2011 8m square flute that was ~8mm in length notch that was pretty small ~10mm, 4-5 mm deep fluted end (quite long) notched end also quite long Link to comment Share on other sites More sharing options...
alberta187 Posted September 29, 2011 Report Share Posted September 29, 2011 ^^^ that resembles what I heard of the november 2010 design this is how i remember it... not 100% sure of the dimensions, fluted triangle on one side, with flutes roughly 4mm long simple long flute on the other side, and two saddles, both on the same side , one 3mm deep, the other 5mm deep Link to comment Share on other sites More sharing options...
zap_man99 Posted September 29, 2011 Report Share Posted September 29, 2011 IMO they are getting harder each year. Link to comment Share on other sites More sharing options...
determinat0r Posted September 29, 2011 Report Share Posted September 29, 2011 I wonder if it'll be difficult again this year with the introduction of having carving optional on the DAT Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.